Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Light bulb

The headlight bulb of the Fiat 500 can be replaced by opening the hood, in order to have access to the components inside the engine compartment: here you will find the panel covering the internal part of the headlight assembly, which must be removed in order to locate the bulb underneath. The bulb can now be removed from its housing by disconnecting it from the connector: the connector must be connected to the new bulb so that the headlight can be closed and checked to ensure everything is working.

Posted on 8 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Front Headlamp Bulb on a Fiat 500?
How to Replace the Front Headlamp Bulb on a Fiat 500?
Fiat 500 (2007-2022 / ) To replace the front headlamp bulb on a Fiat 500, open the bonnet to access the screws securing the headlamp from the top. You may also need to detac…
How to Replace the Front Light Bulb on a Fiat 500?
How to Replace the Front Light Bulb on a Fiat 500?
Fiat 500 (2007-2021 / ) To replace the front light bulb on a Fiat 500, access the inner cover of the wheel arch corresponding to the bulb that needs replacing. Here, you wil…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos