Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Vehicle's Suspension Height

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Suspension system

See other generations:
Video tutorial

Adjusting the vehicle's suspension is a modification that can cause various serious issues, so it is advisable only for experienced individuals. Remove the front suspension and unsolder the spring retaining plate, then re-solder it 5 or 6 centimetres higher.

For the rear suspension adjustment, you need to work on the leaf spring mounts. These mounts should be extended by about 8 or 10 centimetres, so it is necessary to create extensions to attach to the original supports to allow for this modification.

For those who want to tackle very challenging off-road routes, it is advisable to protect the engine and transmission components by fitting a robust metal guard underneath the bodywork. After making the modifications, it is essential to check the wheel alignment and fit suitable tyres.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Adjust the Dipped Headlights on a Fiat Panda 169
How to Adjust the Dipped Headlights on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will learn how to adjust the height or angle of the dipped headlights on a Fiat Panda 169. You can make the adjustment in two d…
Reasons why the front suspension may break on a Fiat Panda.
Reasons why the front suspension may break on a Fiat Panda.
Fiat Panda (2003-2012 / 169, MK 2) As we see in the video, the failure of the front suspension is possible on Fiat Pandas due to the deterioration of various components, such as shock …
Replacing the Front Shock Absorbers on the Fiat Panda 169
Replacing the Front Shock Absorbers on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This guide outlines the main steps to remove and replace the front shock absorbers on the Fiat Panda 169, second series. First, lift the vehicle and …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos