|
Do it yourself
| |||
| ||||
How to eliminate gasoline odors from the cabin of a vintage Fiat
Model: Fiat 500
Epoca
- Years:
1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Video tutorial
In this video we see a very common problem with vintage Fiat 500s, which are wonderful but were built to be economical, and inside the cabin there is always a smell of gasoline. Like many air-cooled vintage cars, the fuel tank is located at the front. Once we have checked that the fuel lines are in good condition, it could be just a problem with the cap, which has a free vent on top. Gasoline fumes are heavier than air, so they tend to stay inside the cabin, so we need to create a vent that leads the fumes outside. Using a pre-drilled 8mm Parrot core magnet (which can be easily found on Temu with code 601099594204761 for 14.28 euros per pair) and glue it directly onto the cap, through which we pass, using an appropriate connector - making sure it is the right size for the height of the hood - a silicone tubing of sufficient length to allow it to come out of the hood. In fact, inside the front hood, we see that there is a convenient hole right on the front, near the right front wheel.
Posted on 9 October 2025 by ScegliAuto
Related tutorials
Fiat 500
(1957-1975 /
Epoca)
Want to bring the carburettor of a Fiat 500 back to life? Let's see how to renew a carburettor from a classic car in this video. After removing the c…
Fiat 500
(1957-1975 /
Epoca)
In this video, see how to start a classic Fiat 500 that has been idle for years. Two approaches were taken: The first involved the fuel system, clean…
Fiat 500
(1957-1975 /
Epoca)
In today's video tutorial, you will see the main steps needed to remove the engine from the body of the Classic Fiat 500. First, open the rear bonnet…
Other guides you may be interested in |
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |