Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speaker from the Panel on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Door trim panel

How to remove the speaker from the door panel of a Fiat Panda. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to remove the plastic cover of the mirror (inner side), then, with a screwdriver, unscrew the fastening screws on the plastic panel (if present). Once all screws are removed, detach all the plastic clips that secure the door. Pull the door panel away with your hands, disconnect any power connectors and release cables. Unscrew the fastening screws of the speaker and remove it from the door.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the speakers of the Fiat Panda
How to replace the speakers of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will explain how to replace the speakers of the Fiat Panda model 169. Before removing the speakers, it is necessary to remove the door panel…
How to Remove the Door Panel with Speakers on a Fiat Panda
How to Remove the Door Panel with Speakers on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To remove the speakers located in the door panel on a Fiat Panda, follow these steps. Before starting the disassembly, disconnect the battery termina…
How to install the window regulator on the Fiat Panda 169
How to install the window regulator on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This guide shows how to replace the electric window regulator on the Fiat Panda 169. First, remove the inner door panel and the speaker. Detach the s…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 1980-2003 - How do you remove the internal door panel on the FIAT Panda 141? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos