Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Fiat 500L

Model: Fiat 500 500 X - Years 2014-2022
Part: Tail light

Removing the rear light is quite simple and requires an 8 mm hex key. First, open the boot and locate the plastic grille on the inner lining of the boot area, directly opposite the light housing. Once the grille is removed, you will find medium-length plastic bushings with an eight mm hex key socket at the end. Simply unscrew these two plastic nuts to free the light and carefully extract it from its housing, paying attention to the pressure clip located towards the outer bodywork.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…
How to Replace the Stop Bulb in a Fiat 500 L
How to Replace the Stop Bulb in a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you can observe how to replace the stop bulb in a rear light of a Fiat 500L. The first thing to do is to remove the rear opti…
Replacing the Rear Light Bulbs on the Fiat 500L
Replacing the Rear Light Bulbs on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, see how to dismantle and replace the rear light bulbs on the Fiat 500L, following the instructions below. First, open the boot of the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos