Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to remove the external handle on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Handle
Operation: How to remove the external handle on Fiat 500

Do we see the removal of the external door handle on a Fiat 500? Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. With a screwdriver we go to unscrew the locking pins in the fixed handle placed on the door panel, unscrew the pins placed in the plastic of the door opening lever. We remove the handle from the door panel, then, with a lever we detach the panel of the plastic coating. With the lever we detach the adhesive panel of the door, we detach the cable of the opening of the lever, then we unscrew the locking pins of the external handle. Let's reassemble everything by proceeding backwards.


Posted on 7 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - Why does the Fiat 500 door handle not work? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 handle? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos