Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust a Fiat 750 Carburettor

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Checks and maintenance

Let’s see how to adjust the carburettor on a Fiat 750. Open and lift the front bonnet (secure it); unscrew the two nuts (located above the cover) of the throttle body cap. Disconnect the power connector and unscrew with a suitable spanner (Allen key) the screw located (as shown in the video) above the throttle body. Unscrew or screw in based on the fuel leakage. After performing maintenance: reconnect the power connector and close the throttle body cap (tighten the securing screws) and close the front bonnet. Test the correct operation of the engine.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Ignition Distributor on the Fiat Panda 750 Fire
Fiat Panda (1980-2003 / 141, MK 1) This guide explains how to adjust and set the ignition timing of the points ignition distributor on the Fiat 750 Fire, as well as the 1000. First, op…
How to Replace the Starter Motor of the Fiat Panda 750
How to Replace the Starter Motor of the Fiat Panda 750
Fiat Panda (1980-2003 / 141, MK 1) This short video tutorial explains how to remove and replace the starter motor of the Fiat Panda 750. The first step is to remove the filter cover; t…
How to Replace Worn Carpets on the Fiat Panda
How to Replace Worn Carpets on the Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Let’s see how to replace the worn carpet on the Fiat Panda 141. It’s a job that anyone can do with a bit of patience. Move the seat forward and press…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos