Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Replacement of the alternator on Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Alternator
Operation: Replacement of the alternator on Fiat Punto

Let's see the replacement of the alternator on Fiat Punto. We pull the bar located at the bottom left of the dashboard and lift the bonnet putting it in safety, we identify the battery of the power supply and disconnect the terminals. Unscrew the pins with a socket wrench, being careful not to damage the cable winding membranes, unscrew all the alternator tightening pins. Once the disassembly is finished, take it out of the engine compartment. Now we take the new replacement part and insert it into the suitable housing, screw in the locking pins, then, tighten the side pins of the alternator. We check the right voltage with a tester by connecting it to the battery.


Posted on 9 November 2023 by ScegliAuto



Replacement of the alternator of the Fiat Punto Evo
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video we will see how to remove and replace the alternator of the Fiat Punto Evo 1.2 petrol engine, but also of the Grande Punto. First of
How to replace the alternator of the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Today we will see, in this short guide, the instructions that will allow us to disassemble and replace the alternator of the Fiat Grande Punto, as we
How to change the alternator of the Fiat Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Let's see the replacement of the alternator of a Fiat Punto. We lift the front hood of the engine, we locate the alternator. We disconnect the batter

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - How much does the alternator pulley cost on the Fiat Punto 1 3 multijet? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos