Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key for the Fiat 500X?

Model: Fiat 500 500 X - Years 2014-2022
Part: Key

It will be possible to program the key for the Fiat 500X by inserting the virgin key into the ignition switch and turning it to start the instrument panel: at this point, a diagnostic tool must be connected to the vehicle's OBD port, which is located under the steering column. Once the connection is established, it will be possible to select the specific car model and its corresponding version: then, you can follow the instructions displayed on the screen to program the key and subsequently verify its functionality.

Posted on 4 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Fiat 500X?
How do you program the key of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) In order to program the key of the Fiat 500X, it will be necessary to insert the blank key into the corresponding lock and turn it to position two to…
How to replace the Fiat 500X key battery
How to replace the Fiat 500X key battery
Fiat 500 (2014-2022 / 500 X) Replacing the smart key battery of your Fiat 500X is undoubtedly one of the simplest operations that can also be carried out in total autonomy and at…
Replacement of the key battery of a Fiat 500x
Replacement of the key battery of a Fiat 500x
Fiat 500 (2014-2022 / 500 X) The video shows how to replace the key battery, with the Keyless Entry system, of a Fiat 500x. It is a very simple operation that takes just a few mi…

    Frequently Asked Questions

    • 500 2007-2024 - What does the Fiat 500 wrench warning light indicate? Read answer

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos