Do it yourself
Frequently asked questions about cars and motorcycles

Some suggestions regarding the Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Checks and maintenance

In this video, we see some useful tricks to simplify our maintenance of the Fiat Ducato. Let's open the hood: to access the power steering, cooling, and brake fluid reservoirs, we need to remove a cover located just below the windshield. There are three tabs to turn counterclockwise, and this way we remove the cover, which allows us to easily access these reservoirs; to be honest, the brake fluid reservoir can also be inspected without opening the cover. Below, we find the windshield washer fluid reservoir, which is normally accessible. Further down, we find the engine oil fill cap, and even lower is the dipstick for checking the engine oil. If we enter the cabin, under both seats we find a convenient pull-out drawer where we can store documents.

Posted on 27 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Ducato (2006-2014 / X250) Installing a new radio in a Fiat Ducato takes about an hour but is a straightforward task. First, remove the old radio by inserting the removal keys …
Fiat Ducato (2014-2026 / X290) In today's video, you will see how to turn off the service light on the Fiat Ducato. First, get into the vehicle and sit in the driver's seat. Now, t…
Fiat Ducato (1981-1993 / MK 1) Hello! Today we will explain how to reset the service light on a Fiat Ducato. It is important to remember that this step should only be done after pe…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos