Do it yourself
Frequently asked questions about cars and motorcycles

What is the Fuse Diagram for the Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Fuse box

In this video, you can see where the fuse boxes for the Fiat Bravo are located and their respective diagrams, useful in case you need to check the fuses of a malfunctioning device. The first box is located inside the cabin, behind the small door at the lower left of the dashboard. The second box is positioned on the left wall of the boot, while the third and final box is located inside the engine compartment, right next to the battery. Ensure you replace blown fuses with replacements of equivalent specifications and always operate with the vehicle turned off.

Posted on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Bravo (2007-2014 / Bravo 2) This guide provides instructions on how to access the internal fuse box of the Fiat Bravo, including the diagram and layout. First, open the driver's…
Fiat Bravo (2007-2014 / Bravo 2) Below, you will find the diagram and positioning of the fuse boxes for the Fiat Bravo, following the instructions provided. First, locate the fuse bo…
Fiat Bravo (2007-2014 / Bravo 2) In this video, we can see where the fuse boxes of the Fiat Bravo are located and the corresponding diagrams, which are useful in case we need to chec…

Other guides you may be interested in

    Frequently Asked Questions

    • Bravo 2007-2014 - Where are the fuse boxes located in the Fiat Bravo? Read answer
    • Bravo 2007-2014 - Where is the fuse of the Fiat Bravo headlights located? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos