Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Fuse Box of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Fuse box

In this video, we can see how simple it is to replace a fuse in the Fiat Bravo. First, we need to know that there are two fuse boxes in the Fiat Bravo; each contains fuses corresponding to different parts of the vehicle, such as the cigarette lighter, etc. (refer to the fuse diagram in the manual or inside the fuse box). Then, open the cover, sit in the driver's seat, and open the trim cover located under the steering wheel on the left side. Once you identify the faulty fuse, use pliers to remove it from its socket and replace it with a similar one of the same amperage. The other box containing the remaining fuses can be found in the engine compartment next to the battery.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses Located on a Fiat Bravo?
Where are the Fuses Located on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) All fuses on a Fiat Bravo are divided among three fuse boxes installed in the vehicle. The first box is located in the lower left part of the dashboa…
Where are the fuses in the Fiat Bravo?
Where are the fuses in the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) Inside the Fiat Bravo, all fuses are contained in two fuse boxes installed within the vehicle: the first is located inside the cabin, behind the pane…
Fuse Diagram and Location for the Fiat Bravo
Fuse Diagram and Location for the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Below, you will find the diagram and positioning of the fuse boxes for the Fiat Bravo, following the instructions provided. First, locate the fuse bo…

Other guides you may be interested in

    Frequently Asked Questions

    • Bravo 2007-2014 - Where are the fuse boxes located in the Fiat Bravo? Read answer
    • Bravo 2007-2014 - Where is the fuse of the Fiat Bravo headlights located? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos