Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Electric Lock from a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door lock

See other generations:
Video tutorial

Learn how to remove the electric lock located in the door panel of a Fiat Grande Punto. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Begin disassembly: remove the switch panel for the window lifters using a lever, then use a screwdriver to unscrew the securing screws on the plastic panel.

Once all screws are removed, use the lever to detach all the plastic clips that secure the door. Remove the cover panel, disconnect any power connectors and release cable.

Peel off the adhesive plastic cover and unscrew the securing screws of the lock; remove it from the door. Reassemble all parts with the new electric lock.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Remove the Electric Lock from the Fiat Punto Door
How to Remove the Electric Lock from the Fiat Punto Door
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the electric lock from the rear door of the Fiat Punto, use a 10 mm spanner. Enter the highlighted hole in the bodywork shown in the video,…
Removing Central Locking from Fiat Grande Punto
Removing Central Locking from Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Need to remove the central locking from the door of a Fiat Grande Punto? Remove the lock if it is damaged. Here’s how to do it on a Grande Punto. Use…
Removing Door Lock from a Fiat Grande Punto
Removing Door Lock from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Need to remove the door lock? Remove the lock if it is damaged. Here’s how to do it on a Grande Punto. Use a lever to remove the switch panel, then, …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos