Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Electric Lock from the Fiat Punto Door

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car door

See other generations:
Video tutorial

To remove the electric lock from the rear door of the Fiat Punto, use a 10 mm spanner. Enter the highlighted hole in the bodywork shown in the video, then use a 13 mm spanner followed by an 8 mm spanner.

This will allow you to remove the external handle, from which you will disconnect the electric connector. Now, work within the door thickness by removing the bolt that secures the motor responsible for opening the door.

This way, you can examine it and repair it if necessary, or replace it if it cannot be repaired. Again, disconnect the electrical part.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Removing the Door Lock on a Fiat Punto
Removing the Door Lock on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, learn how to remove the front door lock on a Fiat Punto. First, open the door and unscrew all the screws from the door panel:…
Removing the Front Door Lock on a Fiat Punto 188
Removing the Front Door Lock on a Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) In today's video, you will learn how to remove the front door lock on a Fiat Punto 188 by following these simple steps. First, open the front door an…
How to Remove the Electric Lock from a Fiat Grande Punto
How to Remove the Electric Lock from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Learn how to remove the electric lock located in the door panel of a Fiat Grande Punto. Before starting the disassembly, disconnect the battery termi…

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the Fiat Punto door switch located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos