Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glow Plugs from a Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Glow plugs

Remove the glow plugs from a Fiat Ducato. Watch this detailed video on how to proceed with the removal. Pull the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Remove the engine cover panel. Take the coil in your hands and twist it until it comes out of the cylinder head. Unscrew the glow plugs with a socket spanner. Take the new glow plug and insert it into the cylinder head using the socket spanner. Finally, reattach the cylinder head cover panel. Test the engine's operation.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on a Fiat Ducato
How to Replace the Glow Plugs on a Fiat Ducato
Fiat Ducato (1993-2016 / MK 2) In this video, see how to replace the glow plugs on a Fiat Ducato 2.5 Aspirated. Unfortunately, on this engine, the fuel pump is located in front of …
Replacement of the Fiat Ducato 2.3 Multijet preheating glow plugs
Replacement of the Fiat Ducato 2.3 Multijet preheating glow plugs
Fiat Ducato (2006-2014 / X250) Today we will discover the main instructions that will allow us to disassemble and replace the glow plugs of the Fiat Ducato 2.3 Multijet. First of a…
How do you replace the glow plugs in the Fiat Ducato 2.3 Multijet?
How do you replace the glow plugs in the Fiat Ducato 2.3 Multijet?
Fiat Ducato (2006-2014 / X250) The glow plugs, as the name suggests, are responsible for raising the temperature of the engine in diesel vehicles, in order to allow it to start lat…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos