Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rocker Cover on a Fiat Ducato

Model: Fiat Ducato - Years 1981-1994
Part: Cylinder head

If you notice that the cylinder head cover is leaking engine oil, a good idea is to replace the gasket to prevent future damage. On this vehicle, there is good working space, so you just need to remove the two hoses that pass over it and unscrew all the screws on top of the cover. At this point, lift the cover and slide it to one side to pull it off, remove the old gasket with a screwdriver, ensuring no small pieces remain, and reposition the new one. When tightening the screws, remember to follow the cross pattern to avoid overloading the gasket at any point.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Thermostat from a Fiat Ducato
How to Remove the Thermostat from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…
Fiat Ducato Air Vent Removal
Fiat Ducato Air Vent Removal
Fiat Ducato (2006-2014 / X250) Removing a damaged air vent? Let’s take out the vent on the Fiat Ducato. Using a screwdriver, unscrew the securing screw located under the air vent. …
Removing the Wing Mirror from a Fiat Ducato X250
Removing the Wing Mirror from a Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) Today you will learn how to remove the external wing mirror from a Fiat Ducato X250 by following these simple instructions. Open the front door first…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos