Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Engine Oil on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Engine oil

Do you want to replace the oil and filter on a Fiat 500? Follow these steps: lift the bonnet and secure it. Raise the car on a column lift; unscrew the oil sump plug, allow the fluid to drain into a disposal container, and refit the oil sump plug. Using a strap wrench, unscrew the oil filter (container) and remove it from the engine bay (fit the new part). Finally, top up with the new fluid, using the metal dipstick to measure the oil level multiple times until you reach the ideal measurement.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter of the Fiat 500 1.3 Multijet
How to Replace the Engine Oil and Oil Filter of the Fiat 500 1.3 Multijet
Fiat 500 (2007-2024 / 312) To perform the routine maintenance service (engine oil and oil filter change), you will need to lift the vehicle; let's see the procedure on the Fiat…
How to Replace the Engine Oil in a Fiat 500?
How to Replace the Engine Oil in a Fiat 500?
Fiat 500 (2007-2024 / 312) To replace the engine oil in a Fiat 500, loosen the drain plug located at the bottom of the engine bay: once this plug is loosened, you can let all t…
Engine Oil and Oil Filter Replacement on a Fiat 500
Engine Oil and Oil Filter Replacement on a Fiat 500
Fiat 500 (2007-2024 / 312) In this tutorial, learn how to replace the engine oil and oil filter on a Fiat 500. First, open the engine bonnet and unscrew the oil filler cap to a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos