Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the headlights of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Headlight

The replacement of the headlights on this car is a simple operation but on average longer than on other models as it is necessary to remove the front fender and the central grille. Once this is done we can proceed with the disassembly of the actual headlights which are anchored to the frame in three points with as many bolts, one on the front, one on the top and one on the side under the side bodywork, which is why we used the disassembly of the bumper. Now all that remains is to disconnect the connector of the power cables of the lighthouse which is held in place by a plastic lever that once removed will allow us to remove the cables.

Posted on 26 June 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seat of a Fiat Panda?
How to remove the front seat of a Fiat Panda?
Fiat Panda (1980-2003 / 141, MK 1) Before we can start, we will have to go and open the front door of our Fiat Panda. Let's start by moving the front seat back completely. Next, we wil…
How to remove the front seat of a Fiat Panda
How to remove the front seat of a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Before starting, we will have to open the front door of our Fiat Panda. So let's start by completely retracting the front seat along the relative tra…
How to remove the air filter on a Fiat Panda
How to remove the air filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before we can start, we will have to go and open the front hood of our Fiat Panda, thus reaching the engine compartment. So let's start by unhooking …

Other guides you may be interested in

How to Remove the Front Seats from a Classic Fiat 500

How to remove the front seats from a classic Fiat 500? In this video, follow these steps: first, slide the seats forward and lift them up, then unscrew the retaining bolts on the rails fixed to the car's chassis using a socket or impact driver (use appropriate release agents if the bolts do not unscrew). Remove the retaining bolts at the bottom of the car (use spanners on both the upper and lower parts of the connecting bolts). Finally, install the new front seat by following the disassembly steps mentioned earlier.

Watch the video!


by ScegliAuto

More videos