Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Headlight

In this video tutorial, you can observe the steps to follow to remove the front headlight of a Fiat Panda car. You will need: a Torx wrench, a 10mm wrench, and an 8mm wrench. Open the engine hood and secure it in position using the appropriate prop rod. To remove the headlight, you first need to take off the central front grille by unscrewing the screws of its trim. At this point, use the 10mm wrench to remove the screws from the bumper to loosen it; unscrew the upper screws near the headlights, then the lower ones, and finally the side screws near the wheel arches. Disconnect the headlight connector by pressing the tab and pulling it out; remove the 3 screws of the headlight and finally gently pull it outwards.

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Fiat Panda
How to replace the front headlight bulb of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replacing the front headlight bulb of your Fiat Panda is really very simple and to complete the operation you just need to follow the procedure descr…
Disassembly of the front headlight of a Fiat Panda
Disassembly of the front headlight of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) .. In today's video, we will see how to disassemble the front headlight of a Fiat Panda, model 169. We start by removing the radiator.. …
Disassembly of the front headlight of a Fiat Panda
Disassembly of the front headlight of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Thanks to this very useful video tutorial today we will see the entire step-by-step procedure to disassemble and replace the front headlight of a Fia…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos