Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Washing and Replacement of Automatic Gearbox Oil

Model: Fiat Croma MK 1 - Years 2005-2010
Part: Transmission

Lift the vehicle on a hydraulic lift, remove the undertray, and unscrew the oil drain plug of the gearbox. Fill the gearbox with the appropriate cleaning additive, start the engine to allow the additive to circulate within the gearbox, and repeat the oil draining process through the designated plug. Once the draining is complete, screw the plug back in and disconnect the hoses connected to the oil cooler, to which the equipment hoses will be connected to ensure complete emptying of the entire system and refilling with new oil and nanotechnology additive.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Automatic Gearbox Oil in a Fiat Croma
How to Replace Automatic Gearbox Oil in a Fiat Croma
Fiat Croma (2005-2010 / MK 1) If the gear changes in the automatic gearbox have become rough and tend to jerk during downshifts and shifts, it is time to replace the automatic gea…
Replacing Gear Gaiter on Fiat Croma
Replacing Gear Gaiter on Fiat Croma
Fiat Croma (2005-2010 / MK 1) You can pull the gaiter out of its housing simply by hand: if it's difficult, use a plastic wedge to help. The gear knob can be unscrewed easily: the…
In the Fiat Croma, how do you reset the Service light?
In the Fiat Croma, how do you reset the Service light?
Fiat Croma (2005-2010 / MK 1) Let's delve into the topic of the service, specifically the oil change and engine filter, concerning the Fiat Croma, which is the vehicle featured in…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos