Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the fuse in the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fuse box

See other generations:
Video tutorial

Replacing the fuses in the Panda? Let's see how to do it. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Locate the container where the fuses are placed.

Using a screwdriver, detach the cover next to the vehicle's battery and remove it from the fuse box. Replace the damaged fuses with new ones.

Refit the cover over the container and close the front bonnet. Test the operation of the Panda (turn on the instrument panel).


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Fuse on a Fiat Panda
How to Replace the Cabin Fan Fuse on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, open the front bonnet of your Fiat Panda. The cabin fan fuse is located inside the fuse box. The fuse box is situated within the en…
Where is the Fuse Box Located in the Fiat Panda?
Where is the Fuse Box Located in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) The 2012 Fiat Panda model 169 has two fuse boxes. The first fuse box is located inside the cabin, on the left side of the dashboard. Inside the first…
Fuse box diagram of the Fiat Panda.
Fuse box diagram of the Fiat Panda.
Fiat Panda (2012-2023 / ) In this article, with the support of the video, we will see the correct fuse diagram of the Fiat Panda. The diagrams are both of the fuse box in the …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2021 - What is the Fiat Panda brake light fuse? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos