Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Filter on a Fiat 124

Model: Fiat 124 MK 1 - Years 1966-1985
Part: Fuel filter

Removing the fuel filter on a Fiat 124. Here’s how to do it from inside the engine bay. Open the bonnet and locate the fuel filter as shown in the video. Unscrew the tightening screw of the clamp around the filter hose (disconnect the wires and various hoses from the filter). Once the filter is removed, take it out of the vehicle (replace it with a new filter). Fit the new fuel filter with all the attached parts (connect hoses and wires). Close the bonnet. Start the Fiat 124 and test the engine operation.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Fiat 124
How to Replace the Air Filter on a Fiat 124
Fiat 124 (2016-2019 / MK 2) Before you can start, open the bonnet of your Fiat 124. First, unclip and move the hoses connected to the air filter housing, releasing the relevant …
How to Reset the Maintenance Light on a Fiat 124 Spider
How to Reset the Maintenance Light on a Fiat 124 Spider
Fiat 124 (2016-2019 / MK 2) To complete the manual reset procedure for the maintenance light on your Fiat 124 Spider, simply follow the steps described below. First, get into th…
How to Change the Air Filter in the Fiat 124 Spider
How to Change the Air Filter in the Fiat 124 Spider
Fiat 124 (2016-2019 / MK 2) To change the air filter in your Fiat 124 Spider, follow these simple steps. First, open the bonnet and locate the air filter assembly. Next, disconn…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos