Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Seatbelt on Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

Remove the seatbelt from the 500? Disassemble the seatbelt and all associated parts. Move the front seat to access the trim panel.

Use a plastic trim lever to remove the upper and lower side trim where the seatbelt retractor is located, then open the plastic cap on the front seat. Use a socket to undo the fastening pin located in the front seat of the seatbelt, then remove the seatbelt reel from its housing.

Fit the new seatbelt retractor with the relevant attached parts to the assembly. Refit the cover panel at the end of the assembly.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2024 / 312) Here are the main instructions to remove and replace the seat belt on a Fiat 500. First, open the front door and start unscrewing the seat belt bolt …
Fiat 500 (2007-2022 / 312) To replace the seatbelt on a Fiat 500, loosen the bolt securing the upper anchor, which must be completely removed. Once the anchor is removed, you c…
Fiat 500 (2007-2021 / 312) To access the rear seat belt, first remove the panel starting from the seat. Unscrew the bolts of the rear seat located in the boot, as shown in the …

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos