Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Removing the rear seat belt on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Door
Operation: Removing the rear seat belt on Fiat 500

To get to the rear seat belt you will first need to remove the panel, starting from the seat. So unscrew the screws of the rear seat, which are located in the trunk, as shown in the video. Also unscrew the seat locking screws located in front of the seats. Lie down the backrests and unscrew the last locking screws, this time behind them (see video). At this point you can extract the seats and unscrew the lower locking screw of the seat belt. VoilÃ! Now you can remove the seat belt! At this point, all you have to do is lift the top cover and remove that bolt as well. As mentioned above, if you also want to remove the belt reel, just detach the panel which at this point will only come off by pulling it.


Posted on 4 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - How to emergency unlock the trunk of a Fiat 500? Read Answer
    • 500 2007-2022 - Why doesn't the door of the Fiat 500 open from the outside? Read Answer
    • 500 2007-2022 - What to do when the window of the Fiat 500 no longer opens? Read Answer
    • 500 2007-2022 - Why does the opening of the trunk of the Fiat 500 Cabrio get stuck? Read Answer
    • 500 2007-2022 - Why did the hatch of the Fiat 500 get stuck? Read Answer
    • 500 2007-2021 - Can't you open the trunk of a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos