Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Seatbelt on a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Checks and maintenance

To replace the seatbelt on a Fiat 500, loosen the bolt securing the upper anchor, which must be completely removed. Once the anchor is removed, you can take off the panel at the base of the door pillar to access the reel around which the seatbelt is wound. By unscrewing the securing screws and disconnecting the attached connectors, you can remove it along with the entire seatbelt. You can then replace it by properly securing and connecting a new one.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Below we will see the main instructions that will allow us to disassemble and replace the seat belt of the Fiat 500. First of all, we open the front …
Fiat 500 (2007-2021 / 312) Remove the seatbelt from the 500? Disassemble the seatbelt and all associated parts. Move the front seat to access the trim panel. Use a plastic trim…
Fiat 500 (2007-2021 / 312) To access the rear seat belt, first remove the panel starting from the seat. Unscrew the bolts of the rear seat located in the boot, as shown in the …

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos