Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Instrument Cluster Lights on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Instrument panel light

See other generations:
Video tutorial

In today’s video tutorial, you will learn how to remove and replace the instrument cluster lights on a Fiat Bravo of the latest series. First, get inside the car and remove the plastic cover located under the steering wheel to access the two screws to unscrew: then, remove the cover and unscrew the screws of the upper plastic.

Next, unclip the tab and unscrew the other screws of the instrument cluster; now, extract it from the car by pulling it out and disconnecting the electrical connector at the back. To open it, simply unscrew the screws found at the back and unclip the tab to access the bulbs!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to disassemble the rear bumper of the Fiat Bravo
How to disassemble the rear bumper of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let's discover the steps for disassembling and replacing the rear bumper of the Fiat Bravo. First of all, let's move to the rear of the vehicle and s…
How to Replace the Instrument Cluster Bulbs in a Fiat Bravo
How to Replace the Instrument Cluster Bulbs in a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the backlighting bulbs of the instrument cluster in a Fiat Bravo, first, unscrew the two bolts located in the plastic element just behind …
How to reset the oil maintenance service on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Learn how to reset the oil maintenance service on a Fiat Bravo. This operation is very simple. Enter the vehicle and turn on the instrument cluster u…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos