Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil maintenance service on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
This video is currently unavailable

Learn how to reset the oil maintenance service on a Fiat Bravo. This operation is very simple.

Enter the vehicle and turn on the instrument cluster using the ignition key located next to the steering wheel. Press the accelerator pedal and the brake pedal simultaneously, then turn off the instrument cluster after it flashes (as shown in the video).

Turn the instrument cluster back on and wait for it to illuminate. Finally, check the changes made to the car. Always remember to carry out modifications to the onboard computer with the engine off.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…
How to Reset the "Service" Light on a Fiat Bravo 1.4
How to Reset the "Service" Light on a Fiat Bravo 1.4
Fiat Bravo (2007-2014 / Bravo 2) Before starting, sit in the driver's seat of your Fiat Bravo 1.4. Activate the instrument cluster by turning the key in the ignition switch. Next, re…
How to reset the "Service" light on a Fiat Bravo
How to reset the "Service" light on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you begin, sit in the driver's seat of your Fiat Bravo. Start by activating the instrument panel by turning the ignition key to position one. …

Other guides you may be interested in

    Frequently Asked Questions

    • Bravo 2007-2014 - How to reset the dual zone climate of the Fiat Bravo? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos