Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Tail light

Do you want to replace the rear light on the Fiat Panda? To remove the car's rear light, unscrew the securing screws. Use a socket or screwdriver to unscrew the securing nuts located at the side of the rear light (right or left side). Once the light is free from any constraints, detach it from the bodywork by disconnecting the relevant power connectors. Replace the damaged light with a new one of the same type. Refit the light and test the operation of the lights after reassembly (turn on the lights using the control levers). Close the tailgate after reassembly.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Fiat Panda?
How to Replace the Rear Light Bulb on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear light bulb on a Fiat Panda, open the boot to access the two bolts located between the seal and the light. Once these are loosened…
Replacement of the rear taillight on a Fiat Panda
Replacement of the rear taillight on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this very useful video tutorial, we are shown how to replace the rear taillight of a Fiat Panda, model 169. We begin the replacement procedure by …
Removing Rear Light of Fiat Panda 2
Removing Rear Light of Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) In today's video, see how to remove the rear light of a second-generation Fiat Panda in simple and quick steps. First, open the boot and unscrew the …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos