Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wiper Motor from a Fiat Punto

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Windshield wipers

Before you can start, you must open the front bonnet. Next, begin by removing the wipers and the corresponding grille to gain access to the motor. Once the grille is removed, unscrew the bolts that secure the motor and the supporting arms. This will free the motor from the car. However, before you can completely remove it, disconnect its connector. At this point, you can remove the motor, successfully completing the disassembly.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Wiper Blades on Fiat Punto
Replacing Wiper Blades on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this tutorial, you will learn how to remove and replace the front and rear wiper blades on a Fiat Punto 188. First, lift the wiper arm: to remove …
How to Remove the Front Wipers of a Fiat Punto
How to Remove the Front Wipers of a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Before starting, exit the cabin and head to the front of your Fiat Punto. Begin by lifting both front wipers by pulling them upwards. Next, turn the …
Removing the Wiper Motor from a Fiat Grande Punto
Removing the Wiper Motor from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will learn how to remove the wiper motor from a Fiat Grande Punto. First, remove the wipers by unscrewing the nuts to take them…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos