Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Fuses on Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuse box

See other generations:
Video tutorial

How do you replace the fuses on a Punto? Open the car door, pull up the lever to open the engine compartment located at the bottom left of the dashboard, and lift the bonnet. Secure the bonnet in place.

Locate the black plastic cover where the fuses are housed. Use a screwdriver to detach the cap next to the vehicle's battery: remove it from the fuse box. Once the box is exposed, replace the damaged fuses with new ones.

After maintenance, refit the fuse box cap and close the bonnet. Test the car's electrical components.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) How to replace the fuses in the Fiat Punto? Let's see how to replace the damaged fuses inside the vehicle. Unscrew the screws of the cover, then remo…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Do you want to replace the fuses in a Fiat Grande Punto? Here’s how to remove the covers of the fuse box. Lift the front bonnet to access the fuses. …
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Do you need to replace the fuses located in the dedicated box on a Fiat Grande Punto? Open the cover and enter the vehicle, remove the trim in the gl…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer
    • Punto 2005-2018 - Where is the fuel pump relay located in the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the air conditioning fuse on Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto turn signal relay located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos