Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bonnet Release Cable on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Body

Start by opening the front bonnet, then remove the bonnet locking mechanism. Once you have removed the locking system, you will have access to the broken cable and its sheath. Before you can remove it, disconnect the other end connected to the handle. After disconnecting the cable, proceed to remove it along with its sheath. To fit the new cable and close everything up, simply follow these steps in reverse, and you will have successfully completed the replacement of the front bonnet release cable on your Fiat Punto.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Gear Cable on Fiat Punto
Remove the Gear Cable on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Replace the gear cable on the Fiat Punto if you have issues. Lift the bonnet and secure it, then use a socket spanner to undo the locking pins of the…
How to Adjust and Replace the Gear Cable on a Fiat Grande Punto?
How to Adjust and Replace the Gear Cable on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To adjust and replace the gear cable on a Fiat Grande Punto, disconnect the battery and completely remove it from its housing. The cable is located n…
How to Replace the Gear Cable on a Fiat Punto?
How to Replace the Gear Cable on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the gear cable on a Fiat Punto, lift the car on the driver's side only and remove the six Torx screws securing the plastic cover of the ge…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos