Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Gear Cable on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Transmission

Replace the gear cable on the Fiat Punto if you have issues. Lift the bonnet and secure it, then use a socket spanner to undo the locking pins of the clutch cable. Start removing the tightening pins of the gear cable as shown in the video. Once the bolts are undone from their seat, remove them. Pull the clutch cable out through the inside of the car (centre tunnel). Once the cable is removed, fit the new part in the engine bay. Feed the new cable from the engine bay to the centre tunnel, then tighten the securing pins.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gear shift cable of the Fiat Punto Evo?
How do you replace the gear shift cable of the Fiat Punto Evo?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to replace the gear cable of the Fiat Punto Evo, you need to remove the gear knob and also the covering around the lever: this way you will …
How to Adjust and Replace the Gear Cable on a Fiat Grande Punto?
How to Adjust and Replace the Gear Cable on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To adjust and replace the gear cable on a Fiat Grande Punto, disconnect the battery and completely remove it from its housing. The cable is located n…
Removing the Handbrake on Fiat Punto
Removing the Handbrake on Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will see how to remove the handbrake along with the wiring on a Fiat Punto. Start by removing the wheel, taking out its b…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos