Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the "Service" Light on a Fiat 500?

Model: Fiat 500 312 - Years 2007-2021
Part: Service warning light

Before proceeding with the reset, ensure that the service has been performed, and then sit in the driver's seat. Start by activating the instrument panel without starting the engine. Once done, press the accelerator pedal eight times. After finishing pressing the accelerator, turn off the instrument panel. At this point, start the engine, and when you do, the light will no longer illuminate. By doing this, you will have successfully completed the reset of the "Service" light on your Fiat 500.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Need to reset the service light on a Fiat 500? Here’s how to do it. To reset the service light on the 500, turn on the ignition. Press the "menu" but…
Fiat 500 (2014-2022 / 500 X) To reset the service light on a Fiat 500, first sit in the driver’s seat and turn on the ignition. Then, press the accelerator pedal fully three time…
Fiat 500 (2014-2022 / 500 X) In this brief and simple guide, learn the steps to reset the service light for the oil change maintenance on a Fiat 500 X. First, get inside the vehi…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos