Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Tail light bulb

Today, learn how to remove and replace the bulbs of the rear light on a second-generation Fiat Panda in simple steps. First, open the boot lid; then, using a screwdriver or a socket wrench, unscrew the screws of the light unit to pull it out and remove it from the car; after that, disconnect the electrical connector found at the back to remove the light unit: then, remove the bulb holder along with the bulbs by releasing the clips. Rotate the faulty bulb to remove it and replace it, applying the reverse procedure for reassembly!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb of the Fiat Panda?
How to Replace the Rear Light Bulb of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear light bulb on the Fiat Panda, open the tailgate to access the screws securing the light unit. These screws are located at the top…
How to Remove the Headlight Bulb on a Fiat Panda
How to Remove the Headlight Bulb on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the bulbs blown in the front headlight of your Fiat Panda? Here’s how to replace them. Lift the bonnet and secure it. Remove the cap covering the…
How to Replace the Bulbs in the Rear Light of a Fiat Panda
How to Replace the Bulbs in the Rear Light of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to remove the rear light on a Fiat Panda and replace the bulbs. Open the boot lid, and remove the plastic cover located at the sides of the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos