Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve Pipe on a Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: EGR valve

See other generations:
Video tutorial

Is the pipe connected to the EGR valve damaged? Want to replace it on a Ducato? Here's how to do it. Lift the vehicle on a column lift and access the underside. Remove the engine cover panel.

Start by unscrewing the retaining bolts around the EGR valve pipe as shown in the video. Once the piece is removed from its seat, use a screwdriver to unscrew the screws on it (separate the clamp).

Fit the clamp onto the new pipe and then secure it in its operating position. Start the vehicle and test the connection.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve on a Fiat Ducato 2.3 MultiJet
How to Remove the EGR Valve on a Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) In this guide, we will see the main instructions on how to remove and replace the EGR valve on the Fiat Ducato 2.3 MultiJet. First, open the vehicle'…
Guide to Replacing the EGR Valve on the Fiat Ducato
Guide to Replacing the EGR Valve on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) In this brief guide, follow the main steps to remove and replace the EGR valve on the Fiat Ducato. First, open the bonnet and start by disconnecting …
How to Remove the EGR Valve from the Fiat Ducato?
How to Remove the EGR Valve from the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To remove the EGR valve from the Fiat Ducato, open the bonnet to access the components inside the engine bay. The valve is located at the rear of the…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos