Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuses on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

How to replace the fuses on a Fiat Bravo? Start by using a plastic lever to remove the cover located in the dashboard under the steering wheel (left side). Then, use needle-nose pliers to disconnect the damaged fuses in the dedicated compartment.

Once this is done, insert the new fuses into their respective slots. Close the fuse inspection box with the cover, and test the correct functioning of the vehicle by turning on the ignition with the appropriate key. Check the operation of the previously non-functioning electrical components.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Fuse Replacement on Fiat Bravo
Fuse Replacement on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Fuse replacement on the Fiat Bravo? Let's see where they are located. Open the door and enter the cabin, you will find the fuse box located under the…
Where to Find the Fuse Boxes on Fiat Bravo
Where to Find the Fuse Boxes on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you can see where the fuse boxes are located on the Fiat Bravo. The Fiat Bravo has three fuse boxes. Each one groups the fuse…
Fuse Diagram and Location for the Fiat Bravo
Fuse Diagram and Location for the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Below, you will find the diagram and positioning of the fuse boxes for the Fiat Bravo, following the instructions provided. First, locate the fuse bo…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos