Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Replacement on Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Fuse box

Fuse replacement on the Fiat Bravo? Let's see where they are located. Open the door and enter the cabin, you will find the fuse box located under the glove compartment in the front dashboard. Remove the cover above the fuses using a plastic lever (if present). Use pliers to disconnect the damaged fuses located in the compartment. Once this is done, insert the new fuses into the designated slots in the compartment. Close the fuse inspection box with the cover, then start the vehicle and check the operation.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Diagram and Location for the Fiat Bravo
Fuse Diagram and Location for the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Below, you will find the diagram and positioning of the fuse boxes for the Fiat Bravo, following the instructions provided. First, locate the fuse bo…
Where to Find the Fuse Boxes on Fiat Bravo
Where to Find the Fuse Boxes on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you can see where the fuse boxes are located on the Fiat Bravo. The Fiat Bravo has three fuse boxes. Each one groups the fuse…
Where Are the Fuses of the Fiat Bravo Located?
Where Are the Fuses of the Fiat Bravo Located?
Fiat Bravo (2007-2014 / Bravo 2) All the fuses of the Fiat Bravo are contained within two fuse boxes installed inside the vehicle: the first is located in the cabin, behind the panel…

Other guides you may be interested in

    Frequently Asked Questions

    • Bravo 2007-2014 - Where are the fuse boxes located in the Fiat Bravo? Read answer
    • Bravo 2007-2014 - Where is the fuse of the Fiat Bravo headlights located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos