Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Spark Plugs on Fiat Punto 1.2

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Spark plugs

In this video tutorial, you will learn how to remove and replace the engine spark plugs on a second series Fiat Punto with a 1.2 Petrol engine. First, open the bonnet and remove the air filter box by unscrewing the side bolts with a socket spanner; then disconnect the rubber hose located underneath, as shown in the video. Next, remove the four spark plug leads and using a socket spanner with an extension, unscrew the spark plugs to remove them; simply replace them with the new ones, screwing them in by hand first and then tightening with a spanner (preferably a torque wrench)!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spark Plugs from a Fiat Punto
How to Remove the Spark Plugs from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the spark plugs from a Fiat Punto? Open the front bonnet and proceed with the spark plug removal. Lift the bonnet and secure it, then r…
How to Replace the Spark Plugs and Ignition Leads on a Fiat Punto 1.2 8V
How to Replace the Spark Plugs and Ignition Leads on a Fiat Punto 1.2 8V
Fiat Punto (1999-2011 / MK 2, 188) Today, we will see, in this brief and simple guide, the instructions to disassemble and replace the spark plugs and ignition leads on a Fiat Punto 1.…
Replacing the Spark Plugs on a Fiat Punto
Replacing the Spark Plugs on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this short video tutorial, you will see how to replace the spark plugs on a second-generation Fiat Punto, produced from 1999 to 2011. Start by ope…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos