Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Front Wing on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

In this video tutorial, follow the instructions to fit the front wing on a Fiat 500. First, position the new wing on the vehicle; then, start securing the upper bolts and the bolts for the triangular piece of the mirror. At this point, also secure the wheel arch screws using a ratchet spanner, and fit the indicator bulb and its holder inside the light unit, as shown in the video.

Finally, secure all the other bolts found in the engine bay, following the video until the end!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove a Front Wing on a Fiat 500?
How to Remove a Front Wing on a Fiat 500?
Fiat 500 (2012-2023 / 500 L) This video clearly shows how to remove the front wing from a Fiat 500. First, to avoid damaging the front bumper, loosen it first as the wing is tuck…
Fitting Front Bumper on Fiat 500
Fitting Front Bumper on Fiat 500
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you will learn how to fit the front bumper of a Fiat 500. After purchasing the new bumper or previously removing the old one …
How to Replace the External Wing Mirror of the Fiat 500
How to Replace the External Wing Mirror of the Fiat 500
Fiat 500 (2007-2024 / 312) In this guide dedicated to all of you who own the new Fiat 500, you will learn how to correctly replace the external wing mirror. First, park the car…

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos