Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the onboard computer on a Fiat Freemont

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Onboard computer

Using a plastic wedge, remove the grey plastic trim above the glove compartment that extends to the buttons below the onboard computer. Similarly, remove the corresponding plastic near the steering wheel. Unscrew the two exposed T15 Torx screws on either side of the buttons. Now, pulling from the bottom of the central panel, remove the button and climate control area (and disconnect its connector). At this point, unscrew the other now-exposed screws and, using the plastic wedge in the gaps, extract the rest of the central dashboard containing the screen.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dashboard Errors Caused by a Flat Battery in the Fiat Freemont
Dashboard Errors Caused by a Flat Battery in the Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) When the battery of the Fiat Freemont is flat, the onboard computer may exhibit unusual and absolutely strange behaviours. These can include incorrec…
How to Change the Time on a Fiat Freemont
How to Change the Time on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) In this short video guide, learn how to change the time on the onboard computer of a Fiat Freemont, produced from 2011 to 2016. Start the vehicle and…
How to Switch from Miles to Kilometres on the Fiat Freemont Dashboard
How to Switch from Miles to Kilometres on the Fiat Freemont Dashboard
Fiat Freemont (2011-2016 / MK 1) In this video, you will learn how to switch from miles to kilometres on the dashboard of the Fiat Freemont. This is a very simple operation. From the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos