Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacement fuel filter on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Petrol filter
Operation: Replacement fuel filter on Fiat 500

Lift the hood and put on the special support rod. Identify the position of the fuel filter, well shown in the video: it is located behind the engine compartment, slightly moved to your left (if you are facing the vehicle). Disconnect the tubes located above the filter itself, then cover the connections to prevent dirt from entering. Unscrew the side bolt holding the filter in place, lift it up and disconnect the connector below. Position yourself on a tray and unscrew the lower cap of the filter compartment. After all the liquid has escaped, replace the filter and cap O-r and that's it.


Posted on 20 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - What is the position of the fuel filter of the Fiat 500? Read Answer
    • 500 2007-2022 - Where is the petrol filter of the Fiat 500 1.2 located? Read Answer
    • 500 2007-2023 - Where is the Fiat 500 petrol filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos