Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Cabin Fan on a Fiat Grande Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

In today's video, we will see how to remove the cabin fan on a Fiat Grande Punto and Punto Evo, following the instructions below. First, get inside the vehicle and remove the glove compartment to access the fan located at the back; then disconnect its electrical connector and unscrew the fixing screws found on the sides to remove it completely.

The video illustrates how to remove just the fan resistor, replacing it with a new one; all that's left is to apply the reverse procedure for reassembly!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below we will see the procedure to remove and replace the cabin fan resistor of a Fiat Grande Punto. First, get inside the vehicle on the front passe…
Guide to Replacing the Cabin Fan of the Fiat Punto Evo
Guide to Replacing the Cabin Fan of the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this guide, we will look at the main instructions on how to disassemble and replace the cabin fan on the Fiat Punto Evo, as well as the Grande Pun…
How to Remove the Fan Resistor on a Fiat Grande Punto
How to Remove the Fan Resistor on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This video shows how to remove the ventilation resistor in the cabin of a Fiat Grande Punto. The resistor is located directly under the dashboard nea…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos