Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Water Pump on Fiat Punto 1.2 Petrol

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Pump

See other generations:
Video tutorial

In this video, we will see the instructions for removing the water pump and the timing belt on a Fiat Punto 1.2 petrol. First, remove the timing cover by unscrewing the fixing screws; then remove the V-belt by loosening the alternator bolt.

Next, remove the crankshaft pulley by unscrewing the fixing screws, and unscrew the screws of the timing chain tensioner to remove it; finally, unscrew the fixing screws of the water pump to remove it and replace it with the new one, following the video to the end!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to replace the water pump on a Fiat Punto?
How to replace the water pump on a Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the water pump on a Fiat Punto, open the bonnet to access the components located inside the engine compartment: on the left side of the en…
How to Remove the Fuel Pump on a Fiat Punto?
How to Remove the Fuel Pump on a Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Follow the steps in the video to remove the fuel pump assembly on the Fiat Punto. Lift the rear seat and unscrew and remove the cover in front of you…
Guide to replacing the water pump of the Fiat Grande Punto 1.2
Guide to replacing the water pump of the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today we will see the instructions that will allow us to dismantle and replace the water pump of the Fiat Grande Punto 1.2. First, we open the hood o…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos