Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on Fiat Panda 3

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Tail light bulb

In this video, we will see the main steps to remove the rear light and replace the bulbs on a Fiat Panda 319, third series. First, open the boot lid and start by undoing the fixing screws of the lights, located on the sides, using a cross-head screwdriver; then pull the light outwards to remove it, disconnecting the electrical connector for the bulbs as shown in the video. At this point, undo the five screws of the light cover to access the bulbs; rotate them to remove and replace them, if necessary, with new ones!

Updated on 14 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Rear Headlamp Bulbs on the Fiat Panda 2
How to Replace the Rear Headlamp Bulbs on the Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) Today, in this video tutorial, we will see how to disassemble and replace the rear headlamp bulbs on the Fiat Panda 169, second generation. First, op…
Remove the Rear Light of the New Panda
Remove the Rear Light of the New Panda
Fiat Panda (2012-2026 / 319, MK 3) How to remove the rear light on a Fiat Panda? Let's look at removing the plastic covers of the rear light. Lift the boot, and locate the screws to be…
How to Replace the Rear Light Bulb on a Fiat Panda?
How to Replace the Rear Light Bulb on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear light bulb on a Fiat Panda, open the boot to access the two bolts located between the seal and the light. Once these are loosened…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos