Do it yourself
Frequently asked questions about cars and motorcycles

Where can I find the fuse boxes on FIAT Ducato?

Model: Fiat Ducato X250 - Years 2006-2014
Part: Fuse box

On FIAT Ducato, produced from 2006 to 2014, if some electronic system no longer works, it will first be necessary to check the integrity of the relative fuse. The first fuse box is located inside the passenger compartment, under the plastic panel of the driver's side dashboard under the steering wheel. This fuse box contains the fuses for most of the internal electronic systems and lights. The second fuse box is located inside the engine compartment, precisely under the plastic panel located to the right of the engine compartment (when looking from the front). It contains the fuses for most of the electronic components in the engine, transmission, and headlights.

Posted on 29 May 2021 by ScegliAuto

Video tutorial

Related tutorials

Fiat Ducato (2014-2024 / X290) In this video you can see where the fuse boxes of the Fiat Ducato are located. There are three fuse boxes in the Fiat Ducato. The fuses are grouped i…
Fiat Ducato (2006-2014 / X250) The video attached to this description shows the diagram and the positioning of the fuses of our Fiat Ducato. The fuses are used to prevent damage to…
Fiat Ducato (2014-2024 / X290) The video attached to this article shows the exact layout and positioning of all the fuses on our Fiat Ducato. The fuses have the task of preventing …

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2006-2014 - Where is the Fiat Ducato starter relay located? Read answer
    • Ducato 2006-2014 - Location and fuse diagram on Fiat Ducato? Read answer

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos