Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Fiat Cars

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

Get in the car and turn on the ignition (not the engine, this is not necessary). Press the accelerator pedal to the floor and, while holding it down, press the brake pedal seven times (also to the floor), as shown in the video.

Do not release the accelerator pedal; keep it pressed for another sixty seconds. Release the pedal and turn off the ignition, leaving it off for another sixty seconds.

Turn it back on and check that the light has disappeared. It is advisable to reset the light only after actually performing the regular service to avoid damaging the vehicle.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Fiat Doblò
Resetting the Service Light on the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) This guide provides instructions to reset the service light for the routine maintenance oil change on the Fiat Doblò. First, get inside the vehicle a…
How to reset the service light on the Fiat Doblo
How to reset the service light on the Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) The following video tutorial shows us the steps to reset the service light of the Fiat Doblo. Before resetting the light, we perform a car service wh…
How to Reset the Service Light on the Fiat Doblò
How to Reset the Service Light on the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) In today's video tutorial, you will see how to reset the maintenance light for the engine oil change on the Fiat Doblò, following the instructions be…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos