Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the radio from the Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Car stereo

In order to extract the radio from the Fiat Bravo, it will be necessary to use some thin objects that can act as levers. These objects will need to be inserted into the slots located on the left and right of the stereo respectively. By inserting these objects and exerting a slight lateral pressure, it will be possible to extract the car radio by pulling towards yourself. Once the car stereo has been removed from its housing, it will be necessary to disconnect its connectors. Once the old stereo has been removed, a new device can be inserted.

Posted on 18 August 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the radio of the Fiat Bravo?
How do you reset the radio of the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) In order to reset the radio of the Fiat Bravo, you need to insert the ignition key into the corresponding slot: once the instrument panel is turned o…
Disassembly and replacement of the Fiat Bravo car radio.
Disassembly and replacement of the Fiat Bravo car radio.
Fiat Bravo (2007-2014 / Bravo 2) This short video will show us the main instructions that will allow us to disassemble and replace the stock car radio with a new multimedia system fo…
How to disassemble the car stereo of the Fiat Bravo?
How to disassemble the car stereo of the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) In this tutorial, we can see how to remove the car radio in the Fiat Bravo, an extremely simple and fast operation. To do this, we will need two spec…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos