Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you remove the Fiat 500 Abarth door panel?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Door
Operation: How do you remove the Fiat 500 Abarth door panel?

In order to remove the door panel of the Fiat 500, you need to remove the plastic cover located above the power window switch and loosen the screws underneath. When these have been loosened, you will need to remove the circular covers located on the side of the panel, above and below the locking mechanism. It will also be necessary to loosen the two screws located under the aforementioned covers. When levering with an object, you will also need to lift the chrome cover of the handle and loosen the bolt underneath. At this point the panel can be detached from the door and can be removed completely after having disconnected all the connectors.


Posted on 26 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2023 - How to emergency unlock the trunk of a Fiat 500? Read Answer
    • 500 2007-2022 - Why doesn't the door of the Fiat 500 open from the outside? Read Answer
    • 500 2007-2022 - What to do when the window of the Fiat 500 no longer opens? Read Answer
    • 500 2007-2022 - Why does the opening of the trunk of the Fiat 500 Cabrio get stuck? Read Answer
    • 500 2007-2022 - Why did the hatch of the Fiat 500 get stuck? Read Answer
    • 500 2007-2021 - Can't you open the trunk of a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos