Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on the Fiat 500?

Model: Fiat 500 312 - Years 2007-2021
Part: Clutch

To replace the clutch on the Fiat 500, open the bonnet to access the engine bay and remove the various obstructing parts shown in the video. Next, lift the car on a ramp and remove the front wheels by loosening the appropriate bolts. This will allow access to the clutch casing, which must be opened by loosening the fixing screws. Once the casing is open, you can remove the clutch discs from inside and replace them with new spare parts. After replacement, reassemble all the parts that were previously removed.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pedal Switch on a Fiat 500?
How to Replace the Clutch Pedal Switch on a Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the clutch switch on a Fiat 500, access the rear of the clutch pedal. This switch lifts upwards when the clutch pedal is pressed, allowing…
How to Replace the Clutch Pedal on the Fiat 500
How to Replace the Clutch Pedal on the Fiat 500
Fiat 500 (2007-2024 / 312) In this brief guide, you will discover the instructions to disassemble and replace the clutch pedal on the Fiat 500. First, get in the vehicle and re…
How to Replace the Clutch Switch on a Fiat 500
How to Replace the Clutch Switch on a Fiat 500
Fiat 500 (2007-2024 / 312) In this short video tutorial, you will see the main instructions for removing and replacing the clutch pedal switch on a Fiat 500. First, get into th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos