Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Pump from a Fiat Panda 900

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Fuel pump

Today we will cover the single point injection pump, with a single injector, fitted on older models of the Fiat Panda 900 - 1000 - 1100. Separate the upper part from the lower by prying on the metal tabs. Remember (or take a photo) how the positive (green) and negative (black) terminals are connected. At this point, remove the fuel supply hose (this will require some force) and the basket. If the metal plate obstructs your work, simply unscrew the single 10 mm screw. Unscrew all the screws that secure the pump filter and clean it with an air gun.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial video, you will learn how to disassemble and replace the fuel pump on a Fiat Panda 1.2 Petrol. First, remove the rear seat bench by …
How to Remove the Fuel Pump from a Fiat Panda
How to Remove the Fuel Pump from a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Before you can start, open the rear hatch of the luggage compartment of your Fiat Panda. Begin by folding down the rear seats, then move the carpet i…
How to Properly Install the Fuel Pump Seal on a Fiat Panda 900 Tank?
How to Properly Install the Fuel Pump Seal on a Fiat Panda 900 Tank?
Fiat Panda (1980-2003 / 141, MK 1) In this video, we see how to install the seal of the pump on a Panda 900: the YouTuber recommends checking how the old pump was mounted, taking a pho…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos